How much does it cost to run a battery tender
Are you one of those people who constantly worry about their carbon foot print and how they might be affecting the Earth? Maybe you are one of those people who just want to know the cost of everything they plug. There is nothing wrong with being such a person, since it just shows how frugal and careful you are. You will want to know everything including how much does it cost to run a Battery Tender and if you should be worried in the first place.
What is a battery tender?
Many of you who own cars but do not yet have Battery Tenders; will surely want to know what they are and why you need one. Simply put, a Battery Tender is a device that you can plug into a standard AC outlet and it moves power in amps to 12 batteries, so they stay operational even if they go unused for long periods of time. These battery tenders are especially important for people who have seasonal vehicles, or do not use the vehicle for months.
When you use a Battery Tender, your vehicles’ batteries will stay as fresh as possible, so that you do not encounter any problems when time comes that you finally use them. These Battery Tender chargers were designed by experts and made in such a way that they charge batteries fully, and make sure that they maintain at the proper voltage for storage, so that they do not suffer ill-effects brought about by trickle chargers.
It is a great idea to buy Battery Tenders because they are designed to charge and maintain many different kinds of lead acid batteries. They are similar to trickle chargers, but they do not bring any danger to your batteries unlike other trickle chargers do. If you are looking for a battery charger, the Battery Tender line is surely what you are looking for. It is available at a very reasonable price indeed.
Cost to use them
Some of you may be wary of these Battery Tenders since you believe they suck up tons of electricity to convert into amps, and that they could drive up your power bills. That is a valid cause for worry but when it comes to these Battery Tenders, there is no need to worry at all, because the amount of energy these tenders suck up is minimal and even negligible.
Think about this: you have 50mA at 13.6 VDC during a routine maintenance charge, which is about .68W. In 60 minutes, you get about 0.00068kW-h, so if you pay $.11 per kW-h, you pay something like $.054 in a month and that is if you operate it 24/7.
Maintenance charges can go up and down to 100mA so you can get a peak of $.10 a month. So that is how much does it cost to run a battery tender and as you can see, it is so tiny that you probably have errant light bulbs that consume more power than the tender.
Are you one of those people who constantly worry about their carbon foot print and how they might be affecting the Earth? Maybe you are one of those people who just want to know the cost of everything they plug. There is nothing wrong with being such a person, since it just shows how frugal and careful you are. You will want to know everything including how much does it cost to run a Battery Tender and if you should be worried in the first place.
What is a battery tender?
Many of you who own cars but do not yet have Battery Tenders; will surely want to know what they are and why you need one. Simply put, a Battery Tender is a device that you can plug into a standard AC outlet and it moves power in amps to 12 batteries, so they stay operational even if they go unused for long periods of time. These battery tenders are especially important for people who have seasonal vehicles, or do not use the vehicle for months.
When you use a Battery Tender, your vehicles’ batteries will stay as fresh as possible, so that you do not encounter any problems when time comes that you finally use them. These Battery Tender chargers were designed by experts and made in such a way that they charge batteries fully, and make sure that they maintain at the proper voltage for storage, so that they do not suffer ill-effects brought about by trickle chargers.
It is a great idea to buy Battery Tenders because they are designed to charge and maintain many different kinds of lead acid batteries. They are similar to trickle chargers, but they do not bring any danger to your batteries unlike other trickle chargers do. If you are looking for a battery charger, the Battery Tender line is surely what you are looking for. It is available at a very reasonable price indeed.
Cost to use them
Some of you may be wary of these Battery Tenders since you believe they suck up tons of electricity to convert into amps, and that they could drive up your power bills. That is a valid cause for worry but when it comes to these Battery Tenders, there is no need to worry at all, because the amount of energy these tenders suck up is minimal and even negligible.
Think about this: you have 50mA at 13.6 VDC during a routine maintenance charge, which is about .68W. In 60 minutes, you get about 0.00068kW-h, so if you pay $.11 per kW-h, you pay something like $.054 in a month and that is if you operate it 24/7.
Maintenance charges can go up and down to 100mA so you can get a peak of $.10 a month. So that is how much does it cost to run a battery tender and as you can see, it is so tiny that you probably have errant light bulbs that consume more power than the tender.
No Sweat Battery Tender Boat Installation
Boats are a big help especially to people who rely their daily living wading through the waters. However, among the most common problems that boats encounter are batteries and that is why they are on the hunt for the knowledge on how to install a Battery Tender on your boat.
The Battery Tender is recognized worldwide for its unparalleled performance as the best charger for any vehicle available on the market today. All of their chargers are designed to efficiently charge batteries without the damaging effects that can be caused by using generic and cheaper trickle chargers.
Learn the easiest way in installing Battery Tender on a boat and find out how this battery charger can save you from a lot of maintenance fees by following the proper steps in changing a boat battery:
First, remove the battery cables from the battery using a wrench.
Second, remove the negative cable to prevent sparks from possible explosion and to be safe from being electrically shocked.
Then, remove the bolts from the battery cable ends.
After that, insert the bolts through the two rings of the Battery Tender terminal harness.
Next, insert the bolts into the battery terminal ends and ensure that the positive and negative wires of the Battery Tender harness match the positive and negative wires of the battery cables.
Afterwards, press the battery terminal ends onto the battery posts and tighten the bolts. The battery cable ends should not be able to move in order to properly be tightened.
Subsequently, connect the two-pronged connector from the Battery Tender to the harness connector that was installed on the battery.
After that, plug the Battery Tender into a 110-volt wall socket.
Lastly, monitor the lights on the Battery Tender. Red light means that it is connected and charging correctly while a steady green light tells that the battery is completely charged.
Aside from the following the proper installation of the Battery Tender to a boat, the following are more pointers to improve the life of a boat’s battery:
• Stay with one battery chemistry and avoid overcharging.
• Never mix old batteries with new ones since they tend to pull down the performance of newer ones.
• Regulate charge voltages based on battery temperature and acceptance to maximize battery life and reduce the charging time.
• Ensure that the charging system you use is capable of delivering sufficient amperage to charge the battery banks efficiently.
• Keep the batteries always clean, cool and dry.
• Check terminal connectors regularly to avoid loss of conductivity and prevent damages.
• Check fluid levels and add distilled water to flooded lead acid batteries when needed.
• Always keep batteries charged since leaving them drained will lower their capacity and reduce their lifespan.
• Clean corrosion using a solution of paste made from baking soda and water.
Upon learning how to install a Battery Tender on your boat through the helpful tips to prolong battery life, stay safe from your next boating adventure and have a good catch.
Boats are a big help especially to people who rely their daily living wading through the waters. However, among the most common problems that boats encounter are batteries and that is why they are on the hunt for the knowledge on how to install a Battery Tender on your boat.
The Battery Tender is recognized worldwide for its unparalleled performance as the best charger for any vehicle available on the market today. All of their chargers are designed to efficiently charge batteries without the damaging effects that can be caused by using generic and cheaper trickle chargers.
Learn the easiest way in installing Battery Tender on a boat and find out how this battery charger can save you from a lot of maintenance fees by following the proper steps in changing a boat battery:
First, remove the battery cables from the battery using a wrench.
Second, remove the negative cable to prevent sparks from possible explosion and to be safe from being electrically shocked.
Then, remove the bolts from the battery cable ends.
After that, insert the bolts through the two rings of the Battery Tender terminal harness.
Next, insert the bolts into the battery terminal ends and ensure that the positive and negative wires of the Battery Tender harness match the positive and negative wires of the battery cables.
Afterwards, press the battery terminal ends onto the battery posts and tighten the bolts. The battery cable ends should not be able to move in order to properly be tightened.
Subsequently, connect the two-pronged connector from the Battery Tender to the harness connector that was installed on the battery.
After that, plug the Battery Tender into a 110-volt wall socket.
Lastly, monitor the lights on the Battery Tender. Red light means that it is connected and charging correctly while a steady green light tells that the battery is completely charged.
Aside from the following the proper installation of the Battery Tender to a boat, the following are more pointers to improve the life of a boat’s battery:
• Stay with one battery chemistry and avoid overcharging.
• Never mix old batteries with new ones since they tend to pull down the performance of newer ones.
• Regulate charge voltages based on battery temperature and acceptance to maximize battery life and reduce the charging time.
• Ensure that the charging system you use is capable of delivering sufficient amperage to charge the battery banks efficiently.
• Keep the batteries always clean, cool and dry.
• Check terminal connectors regularly to avoid loss of conductivity and prevent damages.
• Check fluid levels and add distilled water to flooded lead acid batteries when needed.
• Always keep batteries charged since leaving them drained will lower their capacity and reduce their lifespan.
• Clean corrosion using a solution of paste made from baking soda and water.
Upon learning how to install a Battery Tender on your boat through the helpful tips to prolong battery life, stay safe from your next boating adventure and have a good catch.
How To Properly Connect A Battery Tender
There are several vehicle owners, who highly trust the Battery Tender. Battery Tender is the obra maestra of Deltran Corporation. As of now, it is considered as the most preferred automatic battery maintenance charger. There’s no doubt that Battery Tender, particularly Deltran Corporation gained a lot of respect, since many justified the reliability and functionality of their products. As a matter of fact, even high end auto manufacturers trust Battery Tender.
There are a lot of people who are using motorbikes as their main transportation. Thus, they should have a battery tender with them, to ensure that they’re always on the go. Motorcycles have small batteries and they have much lesser capabilities than their motor counterparts. During winter seasons, these batteries can discharge, especially if it isn’t maintained properly.
Before anything else, we should always consider the dos and don’ts, and we could do this by reading manuals that tackle safety measures. Before using the battery charger, go over all instructions and read the precautionary markings.
Read and follow the instructions that are located on the manual, which can be found in the box. Make sure to have a clear place where you can start your operation.
How to connect a battery tender properly? Going through these steps, you will be able to install the battery tender easily.
1. Set the Battery Tender up on a firm and clean space. The space should be enough to accommodate the battery. The battery needs to be proximal to the power cords.
2. You should ensure that the AC, as well as the DC power cords of the Battery Tender are not caught by any moving parts of the auto.
3. Make sure to ascertain the kind of ground system your vehicle uses. As we all know, a positive ground system will render a positive post to the battery, which is directly affixed to the vehicle chassis. The negative ground system on the other hand, will render a negative post to the battery.
4. Attach the positive clip from the Battery Tender (if necessary, include the ring terminal) to the positive post of the battery, that is if your auto works on a negative ground system. Attach the ring terminal or the negative clip to your auto’s chassis. This chassis connection should be done to the engine block or to any thick metal part of the vehicle’s frame.
5. Attach the Battery Tender in a way that is opposite to Step #4, or simply, if the auto works on a positive ground system. If it is, then you should affix the negative clip to the battery’s negative post, and then the positive clip to the chassis of the vehicle.
There are many tips on how to connect a battery tender properly, and it’s easy to find ‘how to’ guides in order to accomplish the proper connection of the Battery Tender to the vehicle’s battery. You certainly don’t want this task to lead to disaster, and you don’t want to do this if you’re full of uncertainties.
There are several vehicle owners, who highly trust the Battery Tender. Battery Tender is the obra maestra of Deltran Corporation. As of now, it is considered as the most preferred automatic battery maintenance charger. There’s no doubt that Battery Tender, particularly Deltran Corporation gained a lot of respect, since many justified the reliability and functionality of their products. As a matter of fact, even high end auto manufacturers trust Battery Tender.
There are a lot of people who are using motorbikes as their main transportation. Thus, they should have a battery tender with them, to ensure that they’re always on the go. Motorcycles have small batteries and they have much lesser capabilities than their motor counterparts. During winter seasons, these batteries can discharge, especially if it isn’t maintained properly.
Before anything else, we should always consider the dos and don’ts, and we could do this by reading manuals that tackle safety measures. Before using the battery charger, go over all instructions and read the precautionary markings.
Read and follow the instructions that are located on the manual, which can be found in the box. Make sure to have a clear place where you can start your operation.
How to connect a battery tender properly? Going through these steps, you will be able to install the battery tender easily.
1. Set the Battery Tender up on a firm and clean space. The space should be enough to accommodate the battery. The battery needs to be proximal to the power cords.
2. You should ensure that the AC, as well as the DC power cords of the Battery Tender are not caught by any moving parts of the auto.
3. Make sure to ascertain the kind of ground system your vehicle uses. As we all know, a positive ground system will render a positive post to the battery, which is directly affixed to the vehicle chassis. The negative ground system on the other hand, will render a negative post to the battery.
4. Attach the positive clip from the Battery Tender (if necessary, include the ring terminal) to the positive post of the battery, that is if your auto works on a negative ground system. Attach the ring terminal or the negative clip to your auto’s chassis. This chassis connection should be done to the engine block or to any thick metal part of the vehicle’s frame.
5. Attach the Battery Tender in a way that is opposite to Step #4, or simply, if the auto works on a positive ground system. If it is, then you should affix the negative clip to the battery’s negative post, and then the positive clip to the chassis of the vehicle.
There are many tips on how to connect a battery tender properly, and it’s easy to find ‘how to’ guides in order to accomplish the proper connection of the Battery Tender to the vehicle’s battery. You certainly don’t want this task to lead to disaster, and you don’t want to do this if you’re full of uncertainties.